Advantage
Can be installed vertically or parallel to DIN rail, saving up to 50% of rail space.
It can be installed by DIN rail, direct installation or adhesive installation, which is more flexible to use.
Time-saving wire connection thanks to tool-free push-in connection technology.
Modules can be installed immediately without manual bridging, saving up to 80% of time.
Different colors, the wiring is more clear.
Overview
| Connection method | In-line |
| Number of rows | 1 |
| Electric Potential | 1 |
| Number of connections | 18 |
| Open side panel | NO |
| Insulation Materials | PA |
| Flame retardant grade, in line with UL94 | V0 |
| Application field | Widely used in electrical connection, industry, etc. |
| Color | gray、dark gray、green、yellow、cream、orange、black、red、blue、white、purple、Brown |
Wiring Data
| Load contact | |
| Stripping length | 8 mm — 10 mm |
| Rigid Conductor Cross Section | 0.14 mm² — 4 mm² |
| Flexible conductor cross section | 0.14 mm² — 2.5 mm² |
| Rigid Conductor Cross Section AWG | 26 — 12 |
| Flexible Conductor Cross Section AWG | 26 — 14 |
Size
| Thickness | 50.7mm |
| Width | 28.8mm |
| Height | 21.7mm |
Environmental conditions
| Ambient temperature (operating) | -60 °C — 105 °C (max. short-term operating temperature RTI Elec.) |
| Ambient temperature (storage/transport) | -25 °C — 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Ambient temperature (assembled) | -5 °C — 70 °C |
| Ambient temperature (execution) | -5 °C — 70 °C |
| Permissible humidity (storage/transport) | 30 % — 70 % |
Material properties
| Flame retardant grade, in line with UL94 | V0 |
| Insulation Materials | PA |
| Insulation material group | I |
IEC Electrical parameters
| Standard test | IEC 60947-7-1 |
| Pollution level | 3 |
| Overvoltage class | III |
| Rated voltage（III/3） | 690V |
| Rated current（III/3） | 24A |
| Rated surge voltage | 8kV |
Electrical performance test
| Requirements, voltage drop | Passed the test |
| Voltage drop test results | Passed the test |
| Temperature rise test results | Passed the test |
Environmental friendly
| RoHS | No excessive harmful substances |
Standards and Specifications
| Connections are standard | IEC 60947-7-1 |
Precautions
1. The maximum load current of a single clamping device must not be exceeded.
2. When installing multiple terminals side by side, it is recommended to install a DIN rail adapter below the terminal point, or a flange between the terminals.