Can be installed vertically or parallel to DIN rail, saving up to 50% of rail space. It can be installed by DIN rail, direct installation or adhesive installation, which is more flexible to use. Time-saving wire connection thanks to tool-free push-in connection technology. Modules can be installed immediately without manual bridging, saving up to 80% of time. Different colors, the wiring is more clear.

Connection method	In-line
Number of rows	1
Electric Potential	1
Number of connections	7
Open side panel	NO
Insulation Materials	PA
Flame retardant grade, in line with UL94	V0
Application field	Widely used in electrical connection, industry, etc.
Color	gray、dark gray、green、yellow、cream、orange、black、red、blue、white、purple、Brown

Load contact
Stripping length	8 mm — 10 mm
Rigid Conductor Cross Section	0.14 mm² — 4 mm²
Flexible conductor cross section	0.14 mm² — 2.5 mm²
Rigid Conductor Cross Section AWG	26 — 12
Flexible Conductor Cross Section AWG	26 — 14

Thickness	29.2mm
Width	45.5mm
Height	21.7mm
NS35/7.5 High	31.1mm
NS35/15 High	38.6mm

Stripping length	10 mm — 12 mm
Rigid Conductor Cross Section	0.5 mm² — 10 mm²
Flexible conductor cross section	0.5 mm² — 10 mm²
Rigid Conductor Cross Section AWG	20 — 8
Flexible Conductor Cross Section AWG	20 — 10

Ambient temperature (operating)	-60 °C — 105 °C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport)	-25 °C — 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembled)	-5 °C — 70 °C
Ambient temperature (execution)	-5 °C — 70 °C
Permissible humidity (storage/transport)	30 % — 70 %

Flame retardant grade, in line with UL94	V0
Insulation Materials	PA
Insulation material group	I

Requirements, voltage drop	Passed the test
Voltage drop test results	Passed the test
Temperature rise test results	Passed the test

RoHS	No excessive harmful substances

1. The maximum load current of a single clamping device must not be exceeded. 2. When installing multiple terminals side by side, it is recommended to install a DIN rail adapter below the terminal point, or a flange between the terminals.

Connections are standard

IEC 60947-7-1

Standard test	IEC 60947-7-1
Pollution level	3
Overvoltage class	III
Rated voltage（III/3）	690V
Rated current（III/3）	24A
Rated surge voltage	8kV